A
TACTILE · 45g
tactile thocky Akko

Akko Creamy Blue Pro V3

The Akko Creamy Blue Pro V3 is a factory-lubed 45g tactile switch with a rounded bump, deep thock and PC/nylon housing. A strong budget pick.

45g
Actuation
2.2mm pre-travel
3.3mm
Travel
total key travel
4.0/5
Smoothness
our feel rating

How it feels

Smoothness silky → scratchy 8.0

How it sounds

thocky
Profile thocky
Noise level
Spring ping None

Full review

Quick Summary

The Akko Creamy Blue Pro V3 is a light tactile switch built around a Box-style dustproof POM stem in a polycarbonate-over-nylon housing, and it punches well above its price. The bump is gentle and rounded, the factory lube is genuinely usable, and the sound leans deep and thocky rather than sharp. If you want a forgiving, creamy tactile for daily typing without spending much, this is an easy recommendation.

Specs and Feel

This is a tactile switch in the lighter weight class, roughly 45g to actuate and around 55g at bottom-out, with about 2.2mm of pre-travel and 3.3mm of total travel. That shorter-than-MX total travel keeps the keypress feeling crisp and quick rather than mushy. The tactile event sits early and is moderate in size: noticeable and satisfying, but smooth enough that it never feels jarring or scratchy under the finger.

Smoothness is the standout. The factory lube is applied competently, and the POM stem gliding in the PC/nylon housing gives that characteristic “creamy” downstroke the name promises. Stem wobble is well controlled for a switch at this price, and there’s no meaningful scratch to speak of. The acoustic profile is deep and rounded, a clean thock with a bit of fullness from the nylon bottom, and it suits most cases without extra dampening.

Tuning

Run them stock first; the factory lube is good enough that most builds won’t benefit much from a teardown. If you want the last bit of refinement, a light spring lube clears any faint ping, and case foam or a PE layer will deepen the thock further. Films aren’t necessary given the tight stock tolerances.

Verdict

Buy it. The Creamy Blue Pro V3 nails the brief for an affordable tactile: a pleasant rounded bump, real smoothness out of the box, and a deep, agreeable sound with no tuning required. It’s an ideal pick for newcomers wanting a no-fuss tactile and for anyone building a budget board that still sounds and feels considered. Hardcore tactile fans who crave an aggressive, sharp bump may want something heavier, but for everyone else this is a lot of switch for the money.

Frequently asked

Is the Akko Creamy Blue Pro V3 a light or heavy tactile?

It's on the lighter side, actuating around 45g and bottoming out near 55g. The bump is rounded rather than sharp, so it reads as a gentle, easygoing tactile rather than a fatiguing snappy one.

Does the Creamy Blue Pro V3 need lube?

It comes factory lubed and feels smooth out of the box, so most people can run it stock. A light hand-lube on the springs will quiet any faint ping if you're chasing a fully refined sound, but it isn't necessary.

Why is it called "Creamy" and does it sound thocky?

The polycarbonate top and nylon bottom housing give it a deeper, fuller acoustic than a clack-prone all-PC switch. Stock, it leans thocky and muted, pleasant in most builds without foam or mods.

Compare Akko Creamy Blue Pro V3 against another switch

Stack specs, sound profiles, and feel side by side.

Browse all switches →