Akko Creamy Purple Pro
Akko Creamy Purple Pro is a factory-lubed 30g tactile switch with a creamy nylon-on-PC build. A look at its feel, sound, tuning and who it suits.
How it feels
Feel ratings not yet recorded for this switch.
How it sounds
Full review
Quick Summary
The Akko Creamy Purple Pro is a light tactile switch built around a nylon-and-polycarbonate housing and a featherweight 30g spring. It trades a sharp, punchy bump for a gentle, low-effort tactility that leans toward comfort and a soft, “creamy” sound rather than aggressive feedback. If you want an easygoing tactile for long typing sessions, or a forgiving switch for a first foray past membrane boards, this is an inexpensive, sensible pick.
Specs and Feel
Actuation lands around 30g with a bottom-out near 50g, travel runs a shortened 3.0mm total over a 2.0mm pre-travel, and the spring is a 21.5mm steel unit. On paper that’s an unusually light tactile, and in hand it reads that way: the bump is present but rounded, more of a cushioned hint than a definitive ledge. The factory lube does real work here: stroke smoothness is solid for the price, with no obvious scratch through the downstroke. Stem wobble is modest rather than impressively tight; you’ll notice a little play on taller keycaps but nothing that undermines daily typing. The nylon bottom housing and stem against the polycarbonate top give it the deep, slightly muffled pock that the “creamy” name promises.
Tuning
These ship factory-lubed and are genuinely usable stock, so most people can skip the bench work entirely. If you want to refine them, a light pass of switch films will firm up the housing and tame the minor wobble, and a careful hand-lube of the springs quiets any residual ping. Don’t over-lube the slider rails, since the bump is already subtle and extra grease will flatten it further.
Verdict
Buy the Creamy Purple Pro if you want a cheap, comfortable, low-force tactile with a warm sound and almost no setup. It’s an easy recommendation for light-touch typists, all-day office boards, and beginners who want something more interesting than a linear without a heavy bump. Enthusiasts hunting for crisp, snappy tactility should look elsewhere. The bump here is deliberately gentle, and no amount of tuning makes it aggressive.
Frequently asked
Is the Akko Creamy Purple Pro a heavy tactile switch?
No. It actuates at roughly 30g and bottoms out near 50g, putting it among the lightest tactiles you can buy. Typists used to heavier switches should expect a featherlight, fatigue-friendly press rather than a pronounced bump.
Does the Creamy Purple Pro need lubing out of the box?
It ships factory-lubed and feels smooth enough for most builds as-is. Hand lubing is optional and only worth it if you want to chase the last bit of polish or quiet a touch of spring noise.
What housing material does the Creamy Purple Pro use?
A nylon bottom housing and stem paired with a polycarbonate top, which is what gives it that deeper, slightly muted "creamy" acoustic signature.
Compare Akko Creamy Purple Pro against another switch
Stack specs, sound profiles, and feel side by side.