A
SILENT · 50g
silent muted Akko

Akko Fairy Silent Linear

Akko Fairy is a factory-lubed 50g silent linear with nylon housings and a POM stem. Quiet, smooth, and ready for a low-noise build out of the bag.

50g
Actuation
2mm pre-travel
3.3mm
Travel
total key travel
4.0/5
Smoothness
our feel rating

How it feels

Smoothness silky → scratchy 8.0

How it sounds

muted
Profile muted
Noise level
Spring ping None

Full review

Quick Summary

The Akko Fairy is a silent linear switch built for a quiet, no-fuss typing experience. It pairs a 50g actuation with factory lube and dampened travel, so it lands soft and smooth without the clack-and-thock most stock linears bring. If you want a near-silent board that still feels deliberate under the finger, the Fairy is an easy recommendation, especially for shared offices and late-night sessions.

Specs and Feel

This is a true silent linear: a single uninterrupted downstroke at about 50g actuation, climbing to roughly 55g at bottom-out. Travel runs slightly shorter than MX standard at around 2.0mm of pre-travel and 3.3mm total, with built-in dampening that softens both the bottom-out and the return. The nylon top and bottom housings keep the sound profile warm and muted rather than sharp, and the POM stem helps the keystroke glide.

Out of the box the Fairy is genuinely smooth. The factory lube does real work here, and scratch is minimal across the stroke. The dampening is well judged: it cuts noise without turning the keypress into a dead, mushy thud the way some heavier silent switches do. Stem wobble is modest and well within what you’d expect at this price, so caps sit stable without noticeable rattle.

Tuning

There’s little you need to do here. The factory lube and silent dampening mean the Fairy already performs well stock, so most builders can drop them straight in. If you’re chasing the last few percent, a light hand-lube on the springs will calm any faint ping, and switch films can tighten the housing fit slightly, though neither is required.

Verdict

Buy the Fairy if your priority is a quiet board that still feels smooth and intentional to type on. It’s a strong, affordable silent linear that needs no extra work to perform, which makes it ideal for office desks, apartments, and anyone who shares a room with light sleepers. If you specifically want a heavy, dramatic linear feel or a poppy acoustic signature, look elsewhere. For low-noise daily driving, this is a confident pick.

Frequently asked

Are the Akko Fairy switches quiet enough for an office?

Yes. As a dampened silent linear, the Fairy noticeably cuts both the bottom-out thock and the top-out clack, making it a sensible pick for shared spaces and late-night typing.

Do the Akko Fairy switches need lube out of the box?

Not for most people. They ship factory-lubed and feel smooth stock, so a fresh hand-lube is optional rather than necessary.

What is the actuation and bottom-out force of the Akko Fairy?

The Fairy actuates at roughly 50g and bottoms out around 55g, with about 2.0mm of pre-travel and 3.3mm of total travel.

Compare Akko Fairy Silent Linear against another switch

Stack specs, sound profiles, and feel side by side.

Browse all switches →