Akko Silver Pro

Quick Summary

The Akko Silver Pro is a light, short-travel speed linear aimed at typists and gamers who want their keys to fire early without the heft of a typical 40g+ switch bottoming at four millimeters. It actuates around 40g with a clipped 1.00mm pre-travel and a 3.30mm total stroke, and it arrives factory lubed and ready to use. If you like a quick, feathery linear and don’t want to spend an evening tuning, it’s an easy recommendation at this price.

Specs and Feel

This is a true linear: no bump, no click, just a clean glide from top to bottom. The defining trait is the geometry: a 1.00mm pre-travel and a 3.30mm total travel mean the keystroke is shorter than the MX standard in both directions, which lands the actuation point early and gives the switch its “speed” character. Weighting is light, roughly 40g to actuate and about 50g at the floor, so there’s barely any ramp into bottom-out.

Smoothness is the strong suit. The 16.5mm steel spring and factory lube keep the stroke quiet and even, with no obvious scratch through the travel. The polycarbonate top over a nylon bottom housing gives a slightly fuller, less plasticky knock than an all-PC build, and the dustproof Box-style stem keeps wobble in check. Top wobble is present but minor and won’t distract on taller keycaps.

Tuning

There’s little to do here: it’s pre-lubed and feels finished stock. If you’re a tinkerer, a thin pass of lube on the rails and a switch film will tighten the housing and deepen the sound a touch, but neither is necessary to enjoy the switch.

Verdict

Pick it if you want a cheap, light speed linear that performs well straight out of the bag: fast actuation, genuine smoothness, and a clean nylon-bottom sound. Skip it if you prefer a heavier switch or a full 4.0mm of travel, since the short stroke and low weight are the whole point. For the money, it’s one of the more sensible entry points into speed linears.