Akko Starlit 45g

Quick Summary

The Akko Starlit 45g is a light linear aimed at builders who want their RGB to actually shine through the switch. A POM stem rides inside a glittered polycarbonate top and a PA66 nylon bottom, and an integrated LED condenser brightens and spreads per-key lighting. With a ~45g actuation and a short 3.4mm travel, it is a fast, low-effort linear best suited to gamers and lighter typists who like a glow-forward board.

Specs and Feel

This is a genuinely light switch: actuation lands around 45g and bottom-out at roughly 50g, so there is very little ramp before the keystroke ends. Pre-travel is short at 1.8mm and total travel is a clipped 3.4mm, both under MX-standard, which gives the Starlit a snappy, shallow stroke that rewards quick taps. The POM stem keeps the linear pull consistent with no tactile bump or pre-travel catch. Smoothness out of the box is good rather than glassy. There is a faint trace of stock scratch on the upstroke that you notice in slow presses but not at speed. Stem wobble is modest and well controlled, which helps keycaps sit straight and keeps the lighting alignment clean. Sound is on the quieter, rounded side, with the PC top and nylon bottom softening the bottom-out rather than sharpening it.

Tuning

Stock is fine for a glow-focused gaming build, but a light application of thin lube on the stem rails and a careful pass on the springs removes the residual scratch and tightens the acoustics. Films are unnecessary given the controlled wobble, so skip them and put the effort into lube if you want a cleaner result.

Verdict

Buy the Starlit 45g if you are building for RGB brightness and want a light, fast linear that lets the lighting read bright and even. It is a sensible pick for gamers and feathery typists, and a quick lube job takes it from good to very clean. Heavy-handed typists who prefer a deep, weighty stroke and a fuller travel should look elsewhere, but for its lane this is a likeable, well-priced switch.