Geon RAW HE
Geon RAW HE is a Hall Effect linear switch with 3.4mm travel and analog actuation. Smooth, precise, and ready for hot-swap magnetic boards.
How it feels
How it sounds
Full review
Quick Summary
The Geon RAW HE is a Hall Effect linear switch from GEONWORKS, built for the new wave of magnetic, analog-sensing keyboards. It pairs a smooth, MX-familiar typing feel with the adjustable actuation and Rapid Trigger potential that magnetic boards unlock. If you’re building or upgrading an HE board and want a clean, precise linear without a fuss, this is an easy recommendation. Just confirm your PCB is magnetic first.
Specs and Feel
This is a single-stage linear with a 3.4mm full travel and an analog actuation window spanning roughly 0.1mm to 3.3mm, so the trigger point is whatever your board lets you dial in. Force options run light to medium: initial forces of 27g, 36g, and 45g with matching bottom-outs of 40g, 50g, and 60g, making the lightest variant genuinely featherweight and the heaviest a comfortable all-rounder. The PC top and nylon bottom housing give the keystroke a slightly muted, rounded sound rather than a sharp clack, while the POM stem keeps the glide consistent. Geon’s low-cavity mold shows in the tight tolerances: stem wobble is minimal and the downstroke is even from top to bottom. Factory lube is applied well, so scratch is a non-issue out of the box.
Tuning
There’s little to do here. The RAW HE arrives lubed and smooth, and the tolerances don’t beg for films. The real “tuning” happens in software: set your actuation point and experiment with Rapid Trigger to find the response that suits your typing or gaming. Leave the switch itself stock.
Verdict
For anyone already in the magnetic ecosystem, the Geon RAW HE is a confident pick. It delivers a refined, low-wobble linear feel with the full benefit of analog actuation, and the spread of weights means there’s a version for both light-touch typists and gamers who want a bit more resistance. The only catch is the obvious one: it’s HE-only, so skip it unless your board is built for magnetic switches. If it is, this is one of the more polished options going.
Frequently asked
Is the Geon RAW HE compatible with normal MX keyboards?
No. The RAW HE is a Hall Effect (magnetic) switch and only works in boards with magnetic, analog-sensing PCBs. It will not register in a standard mechanical MX board. The MX-like feel refers to the typing experience, not cross-compatibility.
What does the analog pre-travel range mean?
Because the switch is read by a magnetic sensor rather than a mechanical contact, the board can trigger actuation anywhere across the roughly 0.1 to 3.3mm range. That lets you set a custom actuation point and use Rapid Trigger if your board supports it.
Does the Geon RAW HE come lubed?
Yes, it ships factory-lubed and feels smooth out of the box. Most users will be happy running it stock, with no films or hand-lubing required.
Compare Geon RAW HE against another switch
Stack specs, sound profiles, and feel side by side.