Keygeek x Evoworks Rye

Quick Summary

The Keygeek x Evoworks Rye is a light, factory-lubed linear that was originally built to give the Evo75 keyboard a deeper, rounder voice before demand pushed it out as a standalone switch. It actuates around 36g and bottoms out near 45g, so it stays effortless to press while still feeling planted. If you want a quiet-leaning, low-pitched linear that needs no work before it goes in the board, the Rye is an easy recommendation.

Specs and Feel

This is a true linear — no bump, no click, just a clean glide from top to bottom. Actuation sits at 36±2g with a 45±2g bottom-out and a 2.0mm pre-travel, and the total travel comes in shorter than the MX standard at 3.6mm, which gives the press a slightly snappier, more compact bottom. The factory lube is well judged: the stroke is smooth out of the bag with no audible scratch and only minor stem wobble, the kind that disappears entirely once keycaps are on. The headline trait is the sound. The PA12 top and PA6 bottom housing combined with the L4 POM stem deliver a deep, rounded thock that leans warm rather than sharp, which is exactly the brief this switch was designed around.

Tuning

There is little left to chase here. The Rye arrives lubed and consistent, so most builders can skip the disassembly entirely. If you want to lean further into the low-end sound, switch films will tighten the housing fit and add a touch more body, but they are an enhancement rather than a fix — the stock switch already delivers the deep profile it promises.

Verdict

Pick the Rye if you want a light linear with a genuinely deep, rounded sound and zero setup overhead. It is a strong fit for quieter office builds and anyone chasing thock without spending an evening lubing switches. Heavy-handed typists who prefer a long, traditional 4.0mm travel may want to look elsewhere, but for everyone after a warm, smooth, ready-to-go linear, this is an easy yes.