K
LINEAR · 40g
linear medium-clacky KTT

KTT Baby Pink Linear

The KTT Baby Pink is a featherlight 40g linear with a POM stem and PC/nylon housing — a cheap, gentle switch for light-typing and pastel-themed builds.

3.8/5
3.8 3.8 · our rating
40g
Actuation
1.9mm pre-travel
3.5mm
Travel
total key travel
3/5
Noise level
medium-clacky

How it feels

Feel ratings not yet recorded for this switch.

How it sounds

medium-clacky
Profile medium-clacky
Noise level 3/5
Spring ping None

Full review

Quick Summary

The KTT Baby Pink is a featherlight 40g linear built for value, pastel-themed boards. With a tiny gap between its 40g actuation and 45g bottom-out, it feels gentle and effortless top to bottom rather than precise or snappy. The sound leans toward a medium clack thanks to the PC top over a nylon bottom. If you want a cheap, soft linear for light typing — and you like the look — it’s an easy pick; if you want a firm, defined bottom-out, look heavier.

Specs and Feel

This is a true linear with no bump or click, running on a short 18mm spring that keeps the whole stroke light. Pre-travel is 1.9mm with 3.5mm total travel, so it actuates early and feels a touch quicker to reset than a full 4mm switch. The defining trait is the weighting: at 40g actuation and just 45g bottom-out, there’s barely any ramp, which makes the Baby Pink feel almost weightless — pleasant for speed, but it offers little resistance to slamming the housing.

The POM stem in a PC top and nylon bottom housing gives decent factory smoothness for the price, with a trace of scratch on bare fingertips that fades under normal rhythm. Stem wobble is average for budget KTT switches — present if you go looking, but not distracting. The PC-over-nylon pairing rounds the note into medium-clacky territory rather than a sharp top-end or a deep thock.

Tuning

The Baby Pink responds well to a light tune but doesn’t demand one. A thin film of lube on the rails tightens the feel and removes most residual scratch, and a dab on the springs silences any ping from the short coil. Films are optional given the budget positioning — spend your effort on case and plate foam instead.

Verdict

Buy the KTT Baby Pink if you want an inexpensive, very light linear that feels soft and forgiving, especially for a pastel build. It’s a smart pick for first builds and fast, light typists. Skip it if you want weight or a snappy floor — its heavier sibling the KTT Baby Yellow (50g) gives more resistance, and the Baby White (43g) splits the difference if 40g feels too faint.

Frequently asked

Is the KTT Baby Pink a light switch?

Very. It actuates around 40g with only a 45g bottom-out, making it one of the lighter stock linears around — easy on the fingers and well suited to fast typists who dislike heavy springs.

Does the KTT Baby Pink need lubing?

It's usable stock, but at this weight a thin rail lube and a dab on the springs noticeably cleans up the faint scratch and any ping. It's a cheap switch that rewards a light hand-tune.

What is the spring weight on the Baby Pink?

It uses a short 18mm spring, which contributes to the light, slightly bouncy actuation and the modest gap between its 40g actuation and 45g bottom-out.

Compare KTT Baby Pink Linear against another switch

Stack specs, sound profiles, and feel side by side.

Browse all switches →