Wooting Lekker Linear60 Magnetic HE
The Wooting Lekker Linear60 is a magnetic Hall effect linear with fully adjustable actuation from 0.1 to 4.0mm. My review of feel, sound and fit.
How it feels
How it sounds
medium-thockyFull review
Quick Summary
The Wooting Lekker Linear60 is the magnetic Hall effect linear that helped popularize analog keyboards. Instead of a metal leaf, magnets and sensors read travel, so you can set the actuation point anywhere from 0.1mm to 4.0mm and use rapid trigger for instant resets. With a 40g start ramping to a firm 60g bottom-out, it’s a gaming-first switch that still feels substantial enough to type on all day — provided your board has the right sensors.
Specs and Feel
Lekker uses magnets rather than physical contacts, so the press is exceptionally smooth and entirely free of bounce or chatter. The force builds from a 40g start to a 60g bottom-out across a 4.0mm travel, giving a medium-weight feel with a clear sense of the floor. A polycarbonate top over a nylon bottom housing produces a clean, slightly deep sound, and the POM stem keeps friction low; a non-magnetic steel spring handles the return without interfering with the sensor. The headline feature is adjustability: actuation is set by distance traveled, configurable per key in firmware. The trade-off is hardware — it requires a Hall effect PCB and won’t work in a normal keyboard, and manufacturing tolerances mean it may not register on every HE board.
Tuning
There’s no traditional lube-and-film tuning here — an analog HE switch is set up in software, not at the bench. Spend your effort in Wooting’s configurator: dial actuation depth per key, enable rapid trigger, and tune analog response curves for movement. The switches come factory-lubed and smooth, so mechanically they’re meant to be run stock.
Verdict
Buy the Lekker Linear60 if you own a Hall effect board and want the benchmark adjustable magnetic linear — it’s smooth, well-built, and the software ecosystem is the most mature in the category. It’s overkill if you just want a nice typing linear, since the value is all in the analog actuation. Against the lighter TTC White Horse, the Lekker feels heavier and more grounded; pick it when you want a substantial press with full per-key tuning.
Frequently asked
Will the Lekker Linear60 fit my keyboard?
Only on a board with Hall effect sensors that supports magnetic switches — Wooting's own boards and other HE keyboards. It won't work in a standard mechanical PCB, and compatibility can vary even across HE boards.
How adjustable is the actuation?
Fully — anywhere from 0.1mm for a hair-trigger to 4.0mm for a deliberate press, set in firmware per key, plus rapid trigger for fast resets.
How heavy is it?
A 40g starting force ramping to 60g at the bottom, so it's a medium press that feels more substantial than ultra-light HE switches.
Compare Wooting Lekker Linear60 Magnetic HE against another switch
Stack specs, sound profiles, and feel side by side.