Gateron Cap V2 Milky Yellow 50g
The Gateron Cap V2 Milky Yellow 50g is a smooth, factory-lubed budget linear with a milky housing and deep, rounded sound.
How it feels
Feel ratings not yet recorded for this switch.
How it sounds
Full review
Quick Summary
The Gateron Cap V2 Milky Yellow 50g is a budget linear. It pairs a milky PA66 housing with a POM stem and factory lube for a smooth, deep-sounding keystroke. At 50g actuation it sits in the medium-light range, making it an easy daily driver for both typing and gaming. If you want a quiet, rounded linear that needs no extra work, this is one of the safest cheap picks around.
Specs and Feel
This is a clean linear with no bump or click: just a uniform 50g press through a 2.0mm pre-travel and 4.0mm total stroke. The factory lube does most of the heavy lifting: the downstroke is consistently smooth with very little scratch, and only the lightest grain shows up on faster presses. Stem wobble is minimal in both axes, helped by the tight tolerances of the milky Nylon PA66 housing. The POM stem and gold-plated spring give the switch a slightly muted, deep sound signature rather than a bright clack. The milky top is part of why it reads as fuller and quieter than a standard transparent Yellow. It is not the most refined linear money can buy, though at this tier the smoothness and acoustic restraint are strong.
Tuning
You can run these completely stock and be happy. The factory lube is even and the wobble is already low. If you want to chase the last bit of polish, a light pass of thin lube on the springs will kill any faint spring ping, and films give a marginal tightening, but neither is necessary for a good-sounding board.
Verdict
Buy these if you want an affordable, low-effort linear with a deep, mellow sound and reliable out-of-box smoothness. They are an excellent first set for someone new to linears or a no-fuss option for a quiet daily build. Switch hunters chasing top-tier smoothness or a sharper, brighter profile will want to look further up the range, but for the money the Milky Yellow 50g is hard to beat.
Frequently asked
Are Gateron Cap V2 Milky Yellow switches factory lubed?
Yes. They ship factory lubed, which is a big part of why they feel smooth out of the box and why most people skip hand-lubing them entirely.
How heavy is the Gateron Cap Milky Yellow 50g?
Actuation lands at 50g, putting it in the medium-light linear range, a touch firmer than a standard Yellow but still comfortable for long typing and gaming sessions.
Do the Milky Yellow switches need films?
Generally no. Stem wobble is well controlled and the milky housings fit snugly, so films offer only a marginal improvement for most builds.
Compare Gateron Cap V2 Milky Yellow 50g against another switch
Stack specs, sound profiles, and feel side by side.