Gateron KS-33 Low Profile White
Gateron KS-33 Low Profile White is a 45g silent linear with a short 3.0mm travel, POM stem and factory lube. Quiet, smooth and built for slim boards.
How it feels
Feel ratings not yet recorded for this switch.
How it sounds
Full review
Quick Summary
The Gateron KS-33 Low Profile White is a silent linear built for slim, low-profile boards. It pairs a light-to-medium 45g actuation with a short 3.0mm total travel and factory lubing, so it is quiet, brisk and easy to type on out of the box. It is a sensible pick for anyone building a low-profile keyboard who wants office-friendly noise without giving up smooth linear feel.
Specs and Feel
Travel is the headline difference here. With roughly 1.7mm of pre-travel and 3.0mm to the bottom, the stroke is noticeably shorter than the MX-standard 4.0mm, which makes typing feel quick and close to the deck. The 45g actuation sits in the comfortable middle ground: light enough for long sessions, firm enough to avoid accidental presses.
As a silent linear, the KS-33 leans on dampening pads to absorb the up-stroke and bottom-out. The result is a soft, muted landing rather than a sharp click of plastic, with none of the clack you get from a standard linear. The POM stem riding in a PC-top, nylon-bottom housing keeps travel smooth and consistent, and the factory lube takes the edge off any low-profile scratch. Wobble is well controlled for the short stem, though, as with most silent switches, the dampening trades a touch of crisp tactility for quietness.
Tuning
There is little to do here, and that is the point. The switches arrive factory lubed and, being low-profile, leave no space for films or hand-lubing the rails. Use them stock; if you want a slightly fuller sound, a foam-lined low-profile case will do more than any switch-level mod.
Verdict
If you are building a low-profile board and want it quiet, the KS-33 White is an easy recommendation. It delivers smooth, short-travel linear feel with genuinely subdued noise and no required tuning. Buyers who want a deep, weighty MX-style typing experience should look at full-height switches instead. For slim, silent setups, it does what it sets out to do.
Frequently asked
Is the Gateron KS-33 White a true low-profile switch?
Yes. It belongs to Gateron's KS-33 low-profile family and is plate-mount, designed for slim boards rather than standard MX hot-swap PCBs. Make sure your keyboard is built for low-profile switches before buying.
How quiet is the KS-33 White?
It is a silent linear, so dampening pads on the stem soften both the down-stroke and the bottom-out. It is meaningfully quieter than a standard linear, with the muted, low thock typical of silent switches.
Does it need lubing or filming?
No. It ships factory lubed and, as a low-profile design, has no room for films. It is intended to be used stock.
Compare Gateron KS-33 Low Profile White against another switch
Stack specs, sound profiles, and feel side by side.