G
LINEAR · 35g
linear muted Gateron

Gateron Magnetic Genty Semi-Silent HE

Gateron Magnetic Genty Semi-Silent HE: a magnetic linear with mute pads for a hushed top-out, 35g initial force and 3.7mm travel. Feel, sound and verdict.

4.2/5
4.2 4.2 · our rating
35g
Actuation
0mm pre-travel
3.7mm
Travel
total key travel
4.0/5
Smoothness
our feel rating
2/5
Noise level
muted

How it feels

Smoothness silky → scratchy 8.0

How it sounds

muted
Profile muted
Noise level 2/5
Spring ping None

Full review

Quick Summary

The Gateron Magnetic Genty is a semi-silent Hall Effect linear aimed at players and typists who want analog adjustability without the sharp top-out clack most magnetic switches carry. Silicone mute pads on the top housing soften the upstroke, giving it a notably calmer return than the average HE linear. It’s a solid pick if you run an analog board and value a quieter desk over maximum bottom-out thock.

Specs and Feel

This is a light linear with a 35g initial force and roughly 3.7mm of total travel, so the keystroke feels long and smooth with no tactile bump. Pre-travel is free-setting, meaning actuation lives in your board’s software rather than a fixed mechanical point. The POM stem rides a dual-rail design inside a PC top and PA66 bottom housing, which keeps stem wobble in check and the travel consistent across the keystroke. Out of the box it comes lubed, so scratch is minimal and the linear glide is clean. The headline trait is the muted top-out: the mute pads take the edge off the return, dropping typing noise well below a typical magnetic linear without going fully silent on bottom-out.

Tuning

There’s little to do here. It ships pre-lubed and the mute pads are baked into the housing. If you want it quieter still, a soft set of switch pads or a foam-modded plate will hush the remaining bottom-out, but most people will run these stock and be happy.

Verdict

Buy the Genty if you have a Hall Effect board and want analog control with a calmer acoustic signature than standard magnetic linears offer. The light spring, smooth lubed travel and damped top-out make it a comfortable everyday switch for shared spaces and late-night sessions. Skip it only if you’re on a conventional mechanical PCB, since the magnetic stem won’t register, or if you specifically want a loud, poppy bottom-out.

Frequently asked

Is the Gateron Magnetic Genty a Hall Effect switch?

Yes. It's a magnetic Hall Effect linear, so it needs an HE-compatible board to read the analog magnetic signal. It will not work in a standard mechanical PCB wired for metal-contact switches.

What makes the Genty "semi-silent"?

Silicone mute pads sit on the top housing where the stem makes contact on the upstroke, damping the top-out clack. The downstroke bottom-out is still audible, so it quiets the return rather than fully silencing the switch.

Can I adjust the actuation point on the Genty?

On an analog HE board, yes. The switch ships with a free-setting pre-travel, so you set actuation and rapid-trigger behavior in your keyboard's software rather than relying on a fixed mechanical point.

Compare Gateron Magnetic Genty Semi-Silent HE against another switch

Stack specs, sound profiles, and feel side by side.

Browse all switches →