Gateron Nebula Dual Rail 40g Magnetic (HE)
Gateron Nebula Dual Rail 40g Hall Effect linear: adjustable 0.2-3.8mm actuation, 60g bottom-out, POM stem, dual-rail stability. Needs a magnetic PCB.
How it feels
Feel ratings not yet recorded for this switch.
How it sounds
Full review
Quick Summary
The Gateron Nebula Dual Rail is a 40g Hall Effect linear built for analog magnetic boards rather than ordinary mechanical keyboards. Its headline feature is a dual-rail stem that trades the usual loose, swimmy feel of magnetic switches for genuine stability, paired with a fully adjustable actuation point. It’s a strong pick for players who want rapid-trigger and analog input but refuse to give up a composed, tight keypress.
Specs and Feel
This is a light linear: 40g to actuate, 60g at the bottom of a 4.0mm stroke, with a contactless Hall Effect mechanism that reads position magnetically instead of through metal leaves. Because there’s no physical contact point, the travel is uniformly smooth from top to bottom with none of the bounce or chatter that plagues traditional switches. The actuation point is configurable across roughly 0.2mm to 3.8mm in 0.1mm increments, so the same switch can feel like a feather-light gaming trigger or a deeper typing switch depending on how the board is mapped. The standout is the dual-rail POM stem and extended tube structure, which cut the top-heavy wobble most magnetic switches suffer from; the result feels planted and consistent across the keypress. Scratch is minimal out of the box, as expected from a frictionless Hall Effect design.
Tuning
Leave these alone. Hall Effect switches generally arrive smooth and don’t benefit from lube the way leaf-spring linears do, and the real tuning here happens in software via the actuation curve and rapid-trigger settings rather than in the switch itself. Spend your effort dialing in the per-key actuation depth rather than reaching for the brush.
Verdict
Buy it if you’re building or already running a magnetic Hall Effect board and want a light analog linear that doesn’t feel sloppy. The dual-rail stem is the differentiator that makes this worth choosing over cheaper single-rail magnetics. Skip it entirely if you’re on a standard mechanical keyboard, since it physically won’t function without a magnetic-sensing PCB. For the analog crowd, it’s an easy recommendation.
Frequently asked
Will the Gateron Nebula Dual Rail work in a normal mechanical keyboard?
No. This is a Hall Effect switch that reports position via magnets and sensors, so it only works in a board with a magnetic-sensing PCB. Dropping it into a standard hot-swap mechanical keyboard will do nothing.
How adjustable is the actuation point?
The actuation point is set by distance traveled and can be tuned anywhere from roughly 0.2mm to 3.8mm in 0.1mm steps. That lets you run a hair-trigger for gaming or a deeper, more deliberate point for typing.
Does the dual-rail design actually reduce wobble?
Yes. The extra rail on the stem gives it two contact surfaces inside the housing, which tightens up side-to-side play noticeably compared to a single-rail magnetic switch.
Compare Gateron Nebula Dual Rail 40g Magnetic (HE) against another switch
Stack specs, sound profiles, and feel side by side.