G
TACTILE · 55g
tactile muted Gateron

Gateron Sillyworks X Type R 55g

The Gateron Sillyworks X Type R 55g is an all-tactile switch with a 22mm double-stage spring, POM stem and PA66 housing. A hands-on review.

3.9/5
3.9 3.9 · our rating
55g
Actuation
2.2mm pre-travel
3mm
Travel
total key travel
3.8/5
Smoothness
our feel rating
4.0/5
Wobble
lower is better

How it feels

Smoothness silky → scratchy 7.6
Wobble stability rock-solid → loose 2.0
Cleanness glass-smooth → scratchy 2.4

How it sounds

muted
Profile muted
Noise level
Spring ping None

Full review

Quick Summary

The Gateron Sillyworks X Type R 55g is an unusually committed tactile switch: instead of a single bump near the actuation point, the tactility is present from the very top of the keystroke and holds all the way to bottom-out. With a POM stem riding in PA66 nylon housings, a 55g actuation and a 22mm double-stage spring, it’s aimed at typists who want constant, reassuring feedback rather than a soft landing. It’s a strong pick for tactile fans, provided you account for the quality-control caveat below.

Specs and Feel

This is a 100% tactile design with no linear segment, and that’s the defining trait. Pre-travel sits at 2.2mm into a 3.0mm total travel, so the stroke is slightly shorter than the MX standard and the resistance you feel is sustained rather than punchy. Actuation lands near 55g with a 60g bottom-out, a narrow gap that keeps the press feeling consistent end to end; the 22mm double-stage spring firms up the back of the stroke so the bottom-out doesn’t go limp. The POM stem and PA66 nylon housing give it a muted, low-pitched sound signature and a generally smooth glide, with stem wobble kept tidy for a fast, deliberate typing feel.

Tuning

These run well stock thanks to the POM-on-nylon pairing. If you want to refine them, a light hand-application of a tactile-friendly lubricant on the rails and spring will quiet stem ping and tighten the acoustics, but stay off the legs so you don’t sand down the tactile event that’s the whole point of this switch. Films are optional given the housing tolerances.

Verdict

If you specifically want tactility that never lets up (feedback from the first millimeter to the last), the Type R 55g delivers that brief better than most. The caveat is consistency: there are credible reports of chatter on a meaningful share of units, so this is a switch to test thoroughly before committing to a full board, and to buy from a vendor with a sane return policy. For tactile enthusiasts willing to validate their batch, it’s an easy recommend; for anyone who can’t tolerate the risk of hunting down a chattering switch, look at a more proven option first.

Frequently asked

Is the Gateron Sillyworks X Type R a linear or tactile switch?

It is fully tactile with no linear travel. The bump is present from the very top of the keystroke and carries through to the bottom, so you feel resistance the whole way down rather than a single notch near actuation.

What is the actuation and bottom-out force?

The Type R 55g actuates at roughly 55g and bottoms out around 60g, with a 22mm double-stage spring that keeps the tail end of the press from feeling mushy.

Do these switches need lube?

The POM stem in PA66 nylon housings is smooth enough to run stock for most people. A thin tactile-appropriate lube on the rails and springs cleans up any stem ping and tightens the sound, but skip the legs to preserve the bump.

Compare Gateron Sillyworks X Type R 55g against another switch

Stack specs, sound profiles, and feel side by side.

Browse all switches →